I’m trying different things nowadays to see if I can’t be informative *and* fun! Well, at least informative. And maybe blog more regularly, too.
We’ll start it off with something that had been bugging me for a couple of years, for which I just found the explanation.
Computer work engenders some bizarre practices and tenets, but typically one could always rely upon the math. Since computer science departments grew out of math departments at universities, there usually isn’t a lot of wiggle room when it comes to the numbers — except for when hard drive manufacturers let their marketing departments call a 645GB hard drive a ‘750GB hard drive’. But other than the boil-brained, you could pretty much count on the fact that there are 8 bits in a byte, and that a 1 gigabit network connection would (theoretically) let you pass 1024 / 8 = 128 megabytes per second. The numbers were never perfect metric matches (like 1 meter = 100 centimeters), but they were consistent.
So it surprised me to find everyone who talked about fiber channel connection speeds saying that a 4 gigabit fiber channel connection can push 400 megabytes of data, a 2 gigabit connection 200 megabytes of data, and so on. “They must be taking a shortcut,” I thought, and didn’t give it much thought beyond some wondering as to why 4 gigabit fiber channel doesn’t pass the same amount of data that, say, theoretical 4 gigabit ethernet would.
It turns out I was partially dread-bolted clack-dish wrong, though, and discovered recently that there’s a good reason why fiber channel went metric. It’s still not as exact as I’d like, but the approximations were a bit more accurate than I’d thought.
Fiber channel uses an electrical encoding called 8b/10b encoding to carry data on the fiber (and copper, when used). It maps 8-bit symbols to 10-bit symbols in such a way that there won’t be too many 1s or too many 0s sent down the wire — they’ll roughly balance out. And much to my surprise, it’s not just because the designer had OCD and needed to make things come out even — depending on how the signal is carried, if there are too many 1s in a row, capacitors in the circuit that might be used for filtering and such can get charged up to a point that they’d interfere with the signal. So 8b/10b encoding means that for most of the 8-bit values (think ASCII table), there are two ways to encode each character. So, for example, when you send an ‘A’ down the wire, you can choose an encoding with more 1s or more 0s to make the bits balance out.
8b/10b encoding also provides for some extra slots for control codes like the arbitrated-loop loop initialization code and such, so that you don’t have to worry about escaping real data in case your control sequence shows up in a live data transfer.
What this means is that for every 8-bit byte you send down the fiber, it gets converted into a 10-bit byte, and 10 bits get sent for every 8 bits of real data you mean to send:
So when you do the math, instead of 1 gigabit fiber channel being 1024 / 8, it’s actually 1024 / 10 = 102 megabytes/sec, roughly. The line rates aren’t quite exactly on the gigabit mark, but the math is close enough to estimate. Remember that the gigabit/sec unit refers to the line rate — how many bits can go across the fiber in one second — and megabytes/sec refers to the amount of real data (8-bit data coming from or going to a disk) that can be passed in one second. So:
- 1 gigabit fiber = 1088 megabits/sec on the line = 108.8 megabytes/sec of real data (not 128 MB/sec)
- 2 gigabit fiber = 2176 megabits/sec on the line = 217.6 megabytes/sec of real data (not 256 MB/sec)
- 4 gigabit fiber = 4352 megabits/sec on the line = 435.2 megabytes/sec of real data (not 512 MB/sec)
- 8 gigabit fiber = 8704 megabits/sec on the line = 870.4 megabytes/sec of real data (not 1024 MB/sec)
(Per a reminder from MC: these are the theoretical top-end speeds you’ll see, and not what you’ll see in the real world. At least with ethernet, if you get 80% of the theoretical limit, you’re having a good day. Thanks!)
I hope this was at least a little useful, and perhaps even thought provoking. Okay, maybe not. But it’s a nugget of possibly useful information that I discovered recently, and thought I’d try to pass along.